v1.0.0 TODO
- Fix footprints or select alternate part for all discrete single power diodes.
- Fix V+/V- reversed for U19.
- Fix wrong pin order on L2 footprint.
- Select 18V->5V LDO with better power dissipation.
- Add ground testpoints.
- Add +3.3V testpoint.
- Change 5x Gain stage to 4x gain.
- Add slow start control to USB power in?
- Add clock out -> clock in digital switch.
- Swith PLL to NXP variant for wider frequency range? Or contact maxim to what the heck variant they used in their appnote
- Move D1/D2 resistors to bottom
- Move/change those TH testpoints that land under the RPi Pico - PCBWay didn't tent them as requested
- Chip glue drawing for bottom assy?
- Add mech parts for board feet
- Specify thinner stencils